Over the past week, some readers have encountered an error code when resetting their laptop BIOS battery. This problem occurs due to several factors. Now let’s talk about some of them. g.Turn off all peripheral devices connected to the computer.Unplug the power cord from the AC power source.Remove the cover from the PC.Find the battery on the board.Remove the actual battery:Wait 1-5 minutes, then balance the battery.Replace the computer cover promptly.
g.
Clearing all CMOS on your motherboard will reset your BIOS settings to factory defaults, which your motherboard manufacturer guarantees to be commonly used the most.
One of the reasons you might want to clear CMOS is to help troubleshoot or solve specific computer or hardware compatibility issues. Sometimes a simple BIOS reset is all it takes to get a seemingly dead PC backbone running.
You can also clear CMOS to reset the BIOS, system-level password, or if you helped make BIOS changes that you now think may be causing the problem.
Below are three different ways to clear CMOS. Each method is almost as good as the others, but it may be easier for you to find a specific method, or any problem you have may be limited to precise CMOS clearing in detail.
After clearing CMOS, you may need to enter the setup programthe BIOS and thus change some parameters of your hardware. While some of the default settings are usually fine for most modern motherboards, if you’ve sold any modifications yourself, for example:
Usually CMOS Is Removed Using Factory Defaults
Will removing battery reset BIOS?
Not all motherboards contain a CMOS battery, which usually provides power to the motherboards to save BIOS settings. Remember, if you remove and replace the CMOS battery, your BIOS will be reset.Remove the battery, wait a few minutes, then reinsert the battery into the motherboard.
The easiest way to clear CMOS is to go into BIOS setup and reset BIOS settings to factory extension levels.
The exact BIOS menu option for your motherboard type may be different, but look for phrases like factory reset, factory defaults, clear BIOS, load defaults, etc. Each manufacturer seems to describe this differently.
The BIOS Settings option is usually at the bottom of the Maybe screen at the bottom of the BIOS Settings, depending on the structure. If you’re having trouble finding it, take a look at where the Save or Save and Exit options are, as they are usually nearby.
Finally, select an option, save your options, and restart your computer.
The related instructions explain in more detail how to access the BIOS of the utility, but do not show how to set CMOS in the BIOS of the utility. However, it should be pretty straightforward as far as you can find this redesign option.
