Sense Key 0x3 Media Error - Silicon Valley Gazette

Table of Contents

This user guide was created to help you if you are getting Sense Key Media Error 0x3.

PC running slow?

1. Download ASR Pro from the website

2. Install it on your computer

3. Run the scan to find any malware or virus that might be lurking in your system

Improve the speed of your computer today by downloading this software - it will fix your PC problems.

Any 0x3 sensor key error will terminate the command with this unresolved error condition. 0x16 0x0 Data sync label is missing or invalid. This error requires swapping a new disk regardless of the RAID quality. This condition is fatal if data writing is lost and the RAID device disconnects the hard drive.

We have another WARNING in / var / adm / messages in our Solaris server file.

What is SCSI sense key?

The SCSI test condition specifies that each attached device wishes to report a set of conditions it detects. Sense Key is the leading classification for general health. Additional information can also be provided using multiple Supplemental Sensitivity Codes (ASCs) and Supplemental Sensitivity Codes Qualifiers (ASCQs).

ATTENTION: / sbus @ 1f, 0 / SUNW, fas @ e, 8800000 / sd @ 0,0 (sd0):
Error for Command: write (10) Error Level: Fatal
Block requested: 16745265 Error block: 16745269
PosVendor: SEAGATE Serial number: 0030V0KX4A
Sense Key: Media Error
ASC: (registered object 0x14 not found), ASCQ: 0x1, FRU: 0x3
ATTENTION: / sbus @ 1f, 0 / SUNW, fas @ e, 8800000 / sd @ 0,0 (sd0):
Error for command: write (10) Error Level: Repeatable
Block requested: 15943457 Error block: 15943457
Supplier: SEAGATE Serial number: 0030V0KX4A
Sense Key: Media Error
ASC: (registered object 0x14 not only found), ASCQ: 0x1, FRU: 0x3

We have not substantiated or solved the problem. You could inspire us.
Thanks for your support.

I get Sense Key: 0x3 Medium error while trying to burn MP3
ROM. Determine my performance
Redhat 7.1 Vendor_info : ‘RICOH ‘ Identity: ‘CD-R / RW MP8040S haya
it is only controlled by an Adaptec 2940 card, the CD-ROM can only handle one per chain it connects to the surface micro-D connector.
I am using cdrecord to write information to a floppy disk.
Does the body almost have ideas?

[root @ ming / root] # cdrecord -v speed = 2 dev = / dev / sg0 /u/cdimage.raw
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995- 2000 Jörg Schilling – Content type: 1 = CD-ROM
scsidev: ‘/ dev / sg0’
Developer name: ‘/ dev / sg0’
scsibus: -2 Target: Mon: -2 – 2 VarLinux driver version sg: 3.1.17
Libscg with version ‘schily-0.1’
atapi:
0 Device type: removable CD
Version A: 2
Answer format: 4 functions
: SYNCHRONIZATION
Vendor_info : “RICOH ”
Identification: “CD-R / RW MP8040S”
Version AA: “1.25”
> The device looks like this: Mmc Generic CD-RW.
Using Generic SCSI-3 / mmc CD-R Driver (mmc_cdr).
Driver flags: SWABAUDIO
Buf size: 1359872 = 1328 KB
FIFO size: 4194304 corresponds to 4096 KB
Track 01: data 412 MB
total size: 473 MB (46: 56 , 34) = 211226 sectors
Start Lout: 474MB (46: 58/26) matches 211226 sectors
current size: 2048
ATIP hard disk information:
Displayed write performance: 5
not always unlimited
cannot be erased
disk subtype: medium type A, low beta category (A-) (2)
Start ATIP with intro: -11634 (97: 26/66 )
Start and end ATIP: 359849 (79: 59/74)
type: disk short strategy type (phthalocyanine or similar)
Manufacturer index: 3
Manufacturer: CMC Magnetics Corporation
Total Blocks: 359849 Current Blocks: 359849 148623 Blocks Remaining:
Start burning a CD / DVD at speed 2 in the burning application in one session.
Last chance whenand you need to start quitting real writing in 6 minutes.
1 second.
Waiting for the reader to fill the input buffer … the input buffer is ready.
OPC is running …
Start new track at sector level: 0
Track 01: 174 megabytes written with 412 (fifo 100%). cdrecord: I / O
error. write_
g1: scsi sendcmd: retry error
CDB: 2A 00 00 01 5D D7 00 double zero 1F 00
status: 0x2 (CHECK CONDITION) Value
bytes: F0 00 03 double zero 01 5B 45 0C 00 00 Double zero 00 0C 00 00 00 Value
Legend: 0x3 Average error, segment 0 Value
Code: 0x0C Qual 0x00 (write error) Fru 0x0 Sense
Flags: Blk 88901 (valid )

Write track data: Error due to detection 183 416 832 bytes
bytes: 70 double zero 00 00 00 00 00 0C double zero 00 00 00 00 00 00 50 00 00
cdrecord: error d ‘enter exit. Delete cache: scsi sendcmd repeated error

CDB: 35 00 00 00 00 00 double zero 00 00 00
Status: 0x2 (CHECK CONDITION)
Detection bytes: F0 03 double zero 00 01 5B 45 0C 00 double zero 00 00 0C 00 00 double zero
Detection key: medium error 0x3, segment zero
Detection code: 0x0C Qual 0x00 (write error) Fru 0x0
Detection flagsme: Blk 88901 (valid)
cmd finished shortly after timeout 2.751s 120s
Error clearing memory cache
Write time 609: .004s
Fixing …
Fixing time : 123,201 with Cdrecord:
Fifo requires 2953 inputs and 2890 reads. fifo cdrecord
: 0 times empty and 2879 times full, minimum 96% full.

Environment

Red Hat Enterprise Linux 5
Red Hat Enterprise Linux 4
HP Smart Array Controllers with CSS Driver

Problem

What do ciss CHECK CONDITION errors mean in system activity records:

  cciss: cmd 0000010000540000 has CHECK CONDITION Sense cue point = 0x3

The file system is write protected according to CHECK CONDITION Sense Key 0x3 and buffer I / O error.

  kernel: 0000: 05: 00 cciss.0: cciss: e ffff810037e00000 has a validation condition check key of 0x3Kernel: buffer I / O error on device dm-9, browse unit 11064Kernel: Page write lost due to helping troubleshoot I / O errors on dm-9.Kernel: Abandoned log in dm-9 device.Kernel: called ext3_abort.Core: EXT3-fs-overview (dm-9 device): ext3_journal_start_sb: abandoned journal recognizedKernel: remount read-only filesystem

Resolution

Has check condition sense key 0x3?

Indicates that the entire command ended in an unresolved error condition, possibly caused by a valid error in the media or a valid error in the written data.

Check hardware (controller, driver, hard drive, etc.). Make sure all data on this device has been created and run hardware diagnostics.
Contact your hardware vendor. Usually one or more hard drives are faulty and need to be replaced.

Note.

Some older versions of Smart Array firmware may only report a new first failed drive found on some drives, although other additional drives have failed as well. Updating verified firmware does not “fix” a faulty trigger or message carrier error (Sense key = 0x3). However, be sure to properly report defective drives, check the controller firmware version, and update the firmware if it is not updating to the current version recommended by HP. Factor of incorrect reporting of all errors occurred with the operator of the P410i model while operating 5.14 f / w. For thatt moment 6 f / b. Quelle 00b is the latest version available. If you reconnect, your hardware dealer can advise you on the full firmware version.

Reason

The SCSI detection key 0x3 is called “medium error” and also refers to a hardware error in a block device:

  Sens key3h MEDIUM ERROR. Indicates that the poll ended with a fatal poll             An error condition that could have been caused by a standard error or error             in the recorded data. This discovery key can also be returned if the target is found.             it is impossible to distinguish the bracket in the bracket from a specific computer system             car (touch button 4h).

Diagnostic Steps

Check for errors in / var / log / message as shown below:

  cciss: cmd 0000010000540000 has a key meaning CHECK CONDITION = 0x3

PC running slow?

ASR Pro is the ultimate solution for your PC repair needs! Not only does it swiftly and safely diagnose and repair various Windows issues, but it also increases system performance, optimizes memory, improves security and fine tunes your PC for maximum reliability. So why wait? Get started today!

Typically, the TEST CONDITION includes some kind of hardware failure. Use this value “semantic key”And match the following with http://www.t10.org/lists/2sensekey.htm (or http://tldp.org / HOWTO / archived / SCSI-Programming-HOWTO / SCSI – Programming -HOWTO-21.html)
Additional information can be saved for sending when using a horticultural support provider. For example, see “How can I check my Smart Array for hardware problems?”

This solution is a step in the Red Hat Fast Track Publishing program that enables a large library of solutions created by Red Hat engineers to serve customers all together. To give you the knowledge people need as it emerges, many articles can be submitted in an as yet unprocessed form.