Here's how to easily troubleshoot Lexmark e120n problems

Table of Contents

Over the past week, some readers have encountered a known error related to troubleshooting the lexmark e120n printer. This problem occurs for a number of reasons. Now we will deal with them.

PC running slow?

1. Download ASR Pro from the website

2. Install it on your computer

3. Run the scan to find any malware or virus that might be lurking in your system

Improve the speed of your computer today by downloading this software - it will fix your PC problems.

Affected Products:

Description Of The Problem:

The

indicator on the E120 lights up Ready to start (!). This displays the correct user intervention message.
On E120n toner in low light () and ready light combination are both on (!). indicates an error in a compatible toner cartridge.
NOTE. If you are running the Local Printer Setup Utility on your computer, you may also receive a powerful error message.

Initial Diagnosis:

If the Local Printer Settings Utility is running on your new computer, first check if the problem is really with the toner cartridge. If your computer does not display a printer error message, you can practice using the printer control panel to determine the exact problem.
Icon! delicately – this is only the first warning. Continue to press the button () to quickly switch to the secondary lighting sequence.
If the toner cartridge is defective, I would say the light next to comes on three times, then pause Once the conditions are flashing, stop and continue with this pattern.
PC running slow?

ASR Pro is the ultimate solution for your PC repair needs! Not only does it swiftly and safely diagnose and repair various Windows issues, but it also increases system performance, optimizes memory, improves security and fine tunes your PC for maximum reliability. So why wait? Get started today!

NOTE.

All other secondary lighting effects indicate other problems with the printer. For more information, see the user guide for your printer.
If the secondary light pattern indicates cartridge failure, quickly press twice to display the third level light sequence. ! The LED will start flashing.
- Yes! LED blinks once, pause, this pattern repeats as well, a faulty toner cartridge 31 or a missing cartridge is recommended.
- If! The Start of Light light will blink twice and stop repeating this pattern, which indicates a problem with an unsupported 32 toner cartridge.
- If! Weg will blink several times, stop three times and repeat the model declared by the experts, error 33 of cartridge change or invalid refueling will be displayed. NOTE. All other third level lighting schemes indicate a different problem with the device. For more information, see the user guide for your printer.

If all of the Local Printer Setting Utility is running on your computer, first check to see if it indicates a specific cartridge problem with your printer. If the computer does not display a printer error, very quickly press the button on the printer to display a sequence of secondary indicators to be displayed.

Solution:

Turn off our own printer.
Open the front cover.
Reinstall the toner cartridge. Make sure the toner cartridge is still fully inserted.
Close the main area cover and turn on the printer. Wait for the printer to accelerate.lasting 20-40 seconds.
When the printer enters state, try printing again. If this error persists when you turn on the printer or when you try to print, turn off the printer again.
Remove most of the toner cartridge again.
After removing the toner, look inside the printer. Make sure there is no paper inside that could permanently clog the toner cartridge. Remove any paper or other obstructions you find.
Open the back of the printer.
Remove the PC package. Make sure the PC kit is not damaged.
After removing the PC kit, inspect the rear of the printer. Make sure there is nothing there. Remove any paper or other jam you find.
Reinstall the PC kit and this toner cartridge. Make sure everyone is practically full.
Close the front and rear doors of the printer. Make sure their doors are completely closed.
Turn on the printer during operation. Try again when the printer is ready for use.
If the error persists when you turn on the power, or, conversely, is repeated when you try to print, turn off the printer and replace the toner cartridge.
If the problem persists with a different toner cartridge, the printer may need service to fix the problem. For more information see Need Help? At the end of this document.

32 unsupported toner cartridges, 33 replacement cartridges, or incorrect refill error

These errors indicate that an incompatible, refilled, or third-party toner cartridge is installed. First, make sure the following applies:

You are using a genuine Lexmark toner cartridge. If a third-party nicotine cartridge is causing this problem even though it has worked in the past, consider replacing it.
The toner cartridge was not completely refilled or rebuilt. Refilled toner cartridges are indeed supported and may cause this error if the cartridge is installed. To fix any of these errors, you needo Replace the refilled / remanufactured toner cartridge with a genuine Lexmark toner cartridge.

If the previous conditions are correct, proceed to the next steps:

Printer power failure.
Open the front cover.
Replace this toner cartridge when the situation permits:
- Try using a new Lexmark brand toner cartridge if you are using one that is available.
- If it is a good, newly installed Lexmark brand toner cartridge in addition to the one you have left, reinstall the old one you removed when installing the new one.
- Install a working toner cartridge from another printer of the same model, E120 or E120n.
Turn on the printer via the printer. When the printer is ready to be listed, try again.
If the error persists with a different toner cartridge, the printer probably needs service to fix the problem. For more information see “Still need help?” At the end of this document.

Cartridge area 40 error or mismatch means that the installed toner cartridge was manufactured for a different geographic region than the actual printer.

Each printer and toner tube is labeled with a different geographic exchange region. These two words must be written in the same geographic order for them to work together. If you replace a toner cartridge that does not match the printer region code, the printer displays a cartridge region mismatch error.

Here you can find more information about this actual error, including how to fix it and determine the geographic region of your printer and toner cartridge.