Table of Contents
PC running slow?
Here are some simple steps that might help you fix your ext3-fs error. Essentially, the technology tells you that a large gap has been detected between the file system and the journal, and that journal can no longer be used. When this situation occurs, the file system is immediately mounted read-only.
For some reason my RAID 6 add-in could not be mounted and I got the exact error message when I tried to manually mount it
[root @ server ~] # mount / dev / sdb1 / local1 /
mount: completely fs wrong type, option, wrong superblock on / dev / sdb1,
code page missing or other error
In many cases, useful information can be found through the syslog – try
dmesg | Tail or in fact
[root @ server ~] # dmesg | Tail
Add to. Meaning: Internal Niche Failure
end_request: I / O error, dev sdb, sector 806617154
sd 1: 0: 0: 0: SCSI return error: code = 0x08000002
sdb: Current: detection key: hardware error
Add to. Value: target internal I / O error
end_request: error, dev sdb, sector 3025928274
JBD: Restore Failed
EXT3-fs: Record weighing error.
After analyzing and researching the situation on Google, I found that I definitely need to perform a file system check with fsck and what I will do next.
/ dev / sdb1: FILE SYSTEM CHANGED *****
/ dev / sdb1: 1064317/548929536 save data (5.7% non-contiguous), 836681827/1097856503 blocks
Upon completion, I’m sure I was able to edit or see some (about 80-85%) in my data, but editing is write protected !!!! And I have the following experience
end_request: I / O error, dev sdb, sector 781189162
EXT3-fs error (sdb1 device): read_inode_bitmap: Unable to read inode bitmap for block_group = 2980, inode_bitmap implies 97648641
Interrupt login to sdb1 device.
ext3_abort called.
EXT3-fs throws error (sdb1 device): ext3_journal_start_sb: abandoned journal recognized
Reassembling a read-only file system
EXT3-fs corruption (device in sdb1) ext3_new_inode: I / O error
EXT3-fs error (device in sdb1) ext3_mkdir: I / O error
One of the hard drives seems to be faulty and I get SMART messages that I need to replace tomorrow. But can anyone help you create a READ-WRITE bracket? It hassome of our automatic backups and I usually want the backups to stop missing.
PC running slow?
ASR Pro is the ultimate solution for your PC repair needs! Not only does it swiftly and safely diagnose and repair various Windows issues, but it also increases system performance, optimizes memory, improves security and fine tunes your PC for maximum reliability. So why wait? Get started today!
There is another common error in your filesystem. This was most likely caused by a typo.
If your personal filesystem is still writable, mount whatever is write-protected ( mount / the / fs / mount / path -o remount, ro ). If someone cannot do this, you first need to kill every process that wants / can write something there (you can find this with basic -n | grep lsof / the / fs / mount / path < / code>).
Then take a close look at the filesystem ( e2fsck -f -p -C0 / dev / device / path ). If you don't want to hit y a thousand times, use the -y flag around -p - although in this case you will repeatedly say yes to anyone potentially destructive action taken by this file system recovery tool. This,
after you can re-mount it for writing if desired ( mount / the / fs / mount / path -o remount, rw ).
If the audience can get by without problems with the laneOffloading (i.e. you're not really working on your partner's mission to worry about servers 5,000 km away), wouldn't that be convenient to do from the root shell? this rescue system is read only.
You can expect the same loss of detail, although you are not very afraid of such cryptic errors, although there are a lot of them. On the other hand, your filesystem is likely to be slightly damaged.
Description
This article describes how to identify the affected device in the file system.Errors such as "EXT3-fs error" plus "EXT2-fs error".
Can you tell from this output that (devicesd (8,1)), 8 stands for major number, which is sometimes reserved for SCSIEquipment. 1 is minor # for mapped SCSI hard drives.With the special hardware command "diag deviceinfo disk" you canthe list of these hard drives may be in the correct order. For exampleIn the output, the first partition / dev / sda1 (bootable) is shown below.le (device must be sd (8.1)).
EXT3-fs error (sd (8.1)): ext3_get_inode_loc: effectively closedRead inode block - inode = 20, block = 5
EXT3-fs error (SD (8,1) device): ext3_readdir: catalog # 98113contains an alarm at offset 0
Internal HDD 0 (bootable), link: 29.8GB Type: SSD [ATA SanDisk SSD i110] Dev: / dev / sda
Section link: 247.0 MB, 202 MB availableInstalled: Y Tag: dev: / dev / sda1 (boot)
Link to section: 247.0 MB, 204. FreeInstalled: 0 MB N Tag: dev: / dev / sda2 (bootable)
Section link: 28.8 GB, 28.8 GBFree to install: Y Shortcut: dev: / dev / sda3
hard drive HDD1 Link:16 111.8 GB Type: SSD F2CSTK251A10-012] [dev. data:/ dev / sdb
Section link: 17 110.0 GB, 109.5 GB free Installed: Y Tag: Dev: 3adcb5a04fdc1840 / dev / sdb1
hard drive HDD2 Link:32111.8 GB Type: SSD [ATA F2CSTK251A10-012] Developer:/ dev / sdc
Face =" Link to Courier section: 33 110.0 GB, 109.9 GB free installed: N label: 316F4E46548DC8D2 dev: / dev / sdc1
Information about the second error "Error EXT3-fs (device sd (8,17))"points to the sdb1 partition entirely to disk1
Improve the speed of your computer today by downloading this software - it will fix your PC problems.Wat Zijn De Problemen Van Ext3-fs-fouten En Hoe Deze Te Corrigeren
¿Cuáles Son Las Causas Típicas De Los Errores De Ext3-fs Y Cómo Solucionarlos?
Quais São Os Elementos Dos Erros Ext3-fs E Como Resolvê-los
Jakie Są Przyczyny Błędów Ext3-fs I Jak Je Naprawić
Ext3-fs 오류의 원인과 해결 방법
Quels Sont Les Problèmes D'erreurs Ext3-fs Et Comment Les Résoudre
Каковы элементы ошибок Ext3-fs и как их исправить
Was Sind Die Ursachen Für Ext3-fs-Fehler Und Wie Man Sie Behebt
Vilka är Orsakerna Bakom Ext3-fs-fel Och Hur Man åtgärdar Dem
Quali Sono Le Cause Degli Errori Di Ext3-fs E Come Risolverli
